Page 1 of 1
wires!
Posted: Wed Apr 28, 2004 11:09 pm
by Red Squirrel
Post yer wires!
See if anyone can beat this:
Archived topic from Iceteks, old topic ID:2280, old post ID:19363
wires!
Posted: Wed Apr 28, 2004 11:26 pm
by Wren
Yep, looks about like mine, Red!
Archived topic from Iceteks, old topic ID:2280, old post ID:19364
wires!
Posted: Wed Apr 28, 2004 11:31 pm
by Red Squirrel
It's worse behind the case too, can't really see in the pic though. The server downstairs is the same. It's not as bad now that I cut my 15inch cables into shorter ones.
No data problems either. I avoid as much as possible from putting ethernet cables near "high voltage" (125V - not 12V from adapter) power cables.
Archived topic from Iceteks, old topic ID:2280, old post ID:19365
wires!
Posted: Wed Apr 28, 2004 11:34 pm
by Chris Vogel
Hehe... I would be afraid of shocking myself if I had
that many wires, my Canadian friend.
I was on a mission to organise the wires behind my computer desk, but that really doesn't seem neccessary since they never really annoy me anyway. They stay back there, so... When Wren sends me that camcorder, digital camera, iPod, laser printer, and iMac, I will have a lot more wires.
Archived topic from Iceteks, old topic ID:2280, old post ID:19366
wires!
Posted: Thu Apr 29, 2004 4:15 pm
by Red Squirrel
Nah, as long as they're insulated you're safe no matter how much you have. The problem arrives when something sharp goes flying in them, such as droping a knife or a fan blade flying off of a 7000rpm fan... then there's trouble.
Archived topic from Iceteks, old topic ID:2280, old post ID:19371
wires!
Posted: Thu Apr 29, 2004 11:50 pm
by manadren_it
I was going to post my wires, but they are messy, yet unimpressive, especially since I stopped using my printer and a few other things.
Archived topic from Iceteks, old topic ID:2280, old post ID:19377
wires!
Posted: Fri Apr 30, 2004 9:58 pm
by Wren
Tak, I can't send all the goodies...you would never be able to organise it all then.
Archived topic from Iceteks, old topic ID:2280, old post ID:19384